Royal Products 44004 A2-6 Spindle To A2-8 Chuck Adapter Plate

Royal Products 44004 A2-6 Spindle To A2-8 Chuck Adapter Plate Reviews

Other Picture

Royal Products 44004 A2-6 Spindle To A2-8 Chuck Adapter Plate Feature

• Mount an A2-8 chuck on an A2-6 Spindle; 1" thick
• Made from high carbon alloy steel hardened to Rc 48-52
• High accuracy, 0.0003" TIR guaranteed
• Drive button and metric screws (for mounting plate to spindle) are included

Adapter plates offer the flexibility to mount collet chucks and 3-jaw chucks to a wider range of spindles. Mount a larger chuck on a smaller spindle for increased capacity. Mount a smaller chuck on a larger spindle for increased tool clearance and higher speeds. Metric screws included for mounting plate to spindle. Drive button is also included. Hardened and ground. Concentricity of 0.0002" TIR guaranteed.

Visit Store Now !!

Detail Products

Detail Reviews

Sep 16, 2011 11:16:03

HSS 1/4" Spindle Gouge By Stone Mountain Turning Tools SM7061

HSS 1/4" Spindle Gouge By Stone Mountain Turning Tools SM7061 Reviews

Other Picture

HSS 1/4" Spindle Gouge By Stone Mountain Turning Tools SM7061 Feature

• High speed hardened steel blades
• Stay sharper 6 times longer than carbon steel
• 16" Long Wooden Handles
• Honing of blades is required before use

From the woodturner just starting out to the experienced craftsman, this wood turning tool are sure to satisfy your needs. The hardwood handles are 16" long for better leverage and less fatigue when turning. The blades are made from high speed steel hardened to RC 62-64. This blade will stay sharp 6 time longer than carbon steel.

Visit Store Now !!

Detail Products

Detail Reviews

Sep 06, 2011 20:16:03

HSS 3/8" Captive Ring By Stone Mountain Turning Tools SM7072

HSS 3/8" Captive Ring By Stone Mountain Turning Tools SM7072 Reviews

Other Picture

HSS 3/8" Captive Ring By Stone Mountain Turning Tools SM7072 Feature

• High speed hardened steel blades
• Stay sharper 6 times longer than carbon steel
• 16" Long Wooden Handles
• Honing of blades is required before use

From the woodturner just starting out to the experienced craftsman, this wood turning tool are sure to satisfy your needs. The hardwood handles are 16" long for better leverage and less fatigue when turning. The blades are made from high speed steel hardened to RC 62-64. This blade will stay sharp 6 time longer than carbon steel.

Visit Store Now !!

Detail Products

Detail Reviews

Aug 13, 2011 08:32:06

CROWN 1/2" Spindle Gouge

CROWN 1/2" Spindle Gouge Reviews

Other Picture

CROWN 1/2" Spindle Gouge Feature

• 1/2" spindle gouge
• CROWN Pro-PM tools will keep their edge for up to three times that of M2 high-speed steel

Powder metallurgy is not new to turning tools, but until now the available tools were expensive. Crown has succeeded in developing powdered metal tools that provide all the same benefits, but at a reasonable price. The advantage of these super-grade steels is that a tool retains its edge longer, a direct result of the steel being harder and tougher. Even the softest wood has an abrading effect on the cutting edge of a tool. The harder the steel, the better it resists this abrading and the longer they stay sharp. Even more important, they are at their prime in terms of cutting efficiency for far longer than their high-speed steel counterparts. Remember, all tools can be made equally sharp, it is the retention of a productive cutting edge that is the important factor. These tools will keep their edge for up to three times that of M2 high speed steel. What does all this really mean? Less sharpening, more turning, better cuts for a longer time! European ash handles. Honing required before use.

Visit Store Now !!

Detail Products

Detail Reviews

Aug 04, 2011 18:32:05

1/8" Robert Sorby #874H Micro Round Skew

1/8" Robert Sorby #874H Micro Round Skew Reviews

Other Picture

Micro Round Skews are sized for the delicacy and control required for smaller projects and fine detail work. They are a lightweight and highly maneuverable tool for spindle work. Excellent for producing beads, coves, and other details on both small and intermediate sized peices. Favored for production work.10" long overall with a 6-1/4" long ash handle. High Speed Steel (HSS) blade. Made in England.

Visit Store Now !!

Detail Products

Detail Reviews

Aug 01, 2011 14:32:03

WW collet set, metric

WW collet set, metric Reviews

Other Picture

WW collet set, metric Feature

• Includes collet adapter and hollow drawbar with knurled knob
• Includes five metric size collets2.0 mm, 3.0 mm, 4.0 mm, 5.0 mm and 6.0 mm

WW Collets are machined to close tolerance to hold parts or tools very accurately on center. The adapter presses into the #1 Morse taper of the headstock and the WW collets are drawn into the taper of the adapter by means of a hollow threaded drawbar. The set includes five different size collets, but additional collets are available from 0 .3mm to 8.0mm by 0.1 mm increments. Designed for use with Sherline WW collet adapter or other lathes that accept a WW type collet with a body diameter of .312-.313".

Visit Store Now !!

Detail Products

Detail Reviews

Jul 22, 2011 23:00:04

Pinnacle Cryogenic 1" Oval Skew Chisel

Pinnacle Cryogenic 1" Oval Skew Chisel Reviews

Other Picture

Pinnacle Cryogenic 1" Oval Skew Chisel Feature

• Sub-zero cryogenically treated blade
• Manufactured in Sheffield, England
• European ash handle
• Woodcraft exclusive design
• Overall tool length 17" to 23"

Manufactured in Sheffield exclusively for Woodcraft, these cryogenically treated turning tools offer many of the characteristics of powdered metal tools, without the cost. The cryogenic treatment process utilizes sub-zero temperatures, down to -300 degreesF, creating a more uniform grain structure that allows you to hone to a fine edge providing you with a tool that will hold an edge that will last 2-3 times longer that standard tools. Used much like a traditional skew chisel for beading and finish cuts, the rounded sides allow for easy movement across the tool rest. Each tool is mounted in a European ash wood handle. Blade length is 6- 1/2", handle length 10- 1/8", overall length 16- 3/8".

Visit Store Now !!

Detail Products

Detail Reviews

Jul 08, 2011 10:00:04

Sorby Micro Gouge Blade

Sorby Micro Gouge Blade Reviews

Other Picture

This 1/2" wide blade for the Robert Sorby Modular Handle is perfect for general purpose smoothing and shaping on the lathe. High speed steel.

Visit Store Now !!

Detail Products

Detail Reviews

Jul 06, 2011 15:00:04

Sorby Swan Neck Hollowing Blade

Sorby Swan Neck Hollowing Blade Reviews

Other Picture

This versatile attachment for the Robert Sorby Modular Handle (Rockler #25604, sold separately) is perfect for shaping inner lips and curves while turning vases, cups, and more! Made from high speed steel, it features a 1/4" wide shaft and measures 3-1/2" long.

Visit Store Now !!

Detail Products

Detail Reviews

Jul 05, 2011 06:00:09

Beading and Parting, 3/8"

Beading and Parting, 3/8" Reviews

Other Picture

Beading and Parting, 3/8" Feature

• High speed steel resists "blued" softening from overheating
• Sharpened edge lasts 6 times longer than carbon steel
• Ash handle
• Brass ferrule

This HSS 3/8" beading and parting tool will keep a sharpened edge about six times longer than carbon steel and resist "blued" softening from overheating during grinding or from heavy turning. Ash handles offer firm hand control during use and brass ferrules prevent wood splitting from tool pressure. Overall lengths 17" to 21".

Visit Store Now !!

Detail Products

Detail Reviews

May 25, 2011 07:00:06

Robust 9" Comfort Rest with 1" Post

Robust 9" Comfort Rest with 1" Post Reviews

Other Picture

Robust 9" Comfort Rest with 1" Post Feature

• Hardened Steel Rod
• Smooth Tool Operation
• Made in the USA

These rests are exactly what their name implies, truly comfortable. The natural curvature of the rest provides a comfortable opportunity for underhand and overhand style grips. For use with most 16" - 18" lathes, these rests feature a 1" diameter x 3-3/4" long post.

Visit Store Now !!

Detail Products

Detail Reviews

May 19, 2011 01:48:04

Super Long Bowl Scraper

Super Long Bowl Scraper Reviews

Other Picture

Super Long Bowl Scraper Feature

• Longest and thickest finishing scraper available
• 16" long, 1/2" thick, HSS blade
• Reduced vibration
• Long 11-1/2" handle
• Factory sharpened

This is the longest and thickest finishing scraper available. This massive tool has a 16 blade machined from 1-1/8 width by 1/2" thick HSS bar stock, with tip ground in the round side scraper pattern. This tools heft reduces vibration and allows greater tool rest overhang. Exceptional for working extra deep urns, vases, or voluminous small-mouth bowls. 11-1/2" handle. Honing required before use.

Visit Store Now !!

Detail Products

Detail Reviews

Apr 29, 2011 09:00:07

Replacement HSS Cutter, For Midi

Replacement HSS Cutter, For Midi Reviews

Other Picture

Replacement HSS Cutter, For Midi Feature

• Great for turning matching table legs
• Designed to fit almost any midi or mini lathe
• Copies parts up to 10" long
• All Duplicator Controls are located for fast and easy operation
• After an initial set up of 1/2 hour, subsequent set ups take just minutes

For anyone who has to make more than a single turned object, duplicators are almost essential to a good job. Most tables, for example, look more professionally done when all the legs match. If youre making a production run of pens for advertising or other purposes, getting them as close to alike as possible, and doing the job as fast as possible, is important. VEGA duplicators remove stock faster than all but the most experienced woodworkers can, while keeping within very tight tolerances (if the workpiece is heavy enough to not deflect, up to 1/2" can be removed per pass). It works off a template, and can easily work off an original turning (with a 2" maximum turning diameter). Most small-scale lathe duplicating machines do not work well, are poorly made, and the cutters are cheap, often hard or impossible to sharpen, and difficult to replace. And the duplicators will fit only a single machine. VEGA has changed all that. Their three Lathe Duplicators cover mini and midi lathes, and full-sized lathes with swings up to 16". A narrow diamond shaped HSS cutter is included with each duplicator and replacement cutters are available. The Diamond V Kit adapts the duplicator to use solid carbide inserts for production situations where frequent sharpening of the cutter is necessary. Each insert is two-sided and replacement inserts are available. The Midi Duplicator is designed to fit almost any midi or mini lathe on the market and copies parts up to 10" long (there is a 24" version available, too). A nice feature of the Vega is that you retain the option to use hand tools to finish the work or to make changesthe Duplicator can either be removed, or mounted on the back of the lathe with the cutter upside down). Not illustrated.

Visit Store Now !!

Detail Products

Detail Reviews

Apr 25, 2011 22:16:06